How to configure VPN Service in Endian Firewall 3.0 Part – 4

How to configure VPN Service in Endian Firewall 3.0 Part – 4


Introduction

Endian Firewall provides a service called VPN (Virtual Private Network), It provides a secure communication between two different network by using internet connection. Mostly we create VPN service for users who always travel in remote location or from home and they want access of their office resources.

Server Information

Firewall Local IP address 192.168.1.254 (Change with yours)
Firewall Public IP Address 122.176.113.126 (Change with yours)
IP pool assign to remote Host from 192.168.1.10 to 192.168.1.20 (Change with yours)
Port 1194
Protocol UDP
Device type TAP

Configure VPN

You need to enable VPN service in endian firewall from VPN menu. We are giving here VPN configuration in snapshot in which all settings are defined.

vpn1

 

vpn2

Go to VPN menu of authentication section then create a VPN user for secure authentication

vpn3

 

vpn4

Check status of VPN service

Go to Status menu option and confirm the running vpn service status.

vpn5

 Go to Firewall menu of VPN traffic section and Enable VPN Firewall

vpn6

Now, create a VPN Firewall rule

vpn7

 

vpn8

VPN Cleint Installation & Configuration

Download software for your client machine from OpenVPN website. Make sure software must be compatible with your client Operating System.

Install OpenVPN Software also along with TAP driver , Next to continue

 

client1

 

Click on “I agree” to continue

client2

client2

client3

client4

client5

client6

client7

OpenVPN client installation has been done. Now configure OpenVPN cleint. Firstly login in firewall from web and download the CA certificate. Go to VPN menu and download CA certificate. Click on Download certificate

ca

After downloading CA certificate, rename it with ca.cer then paste it in to client machine of folder “C:\Program Files\OpenVPN\config“.

Now go to folder “C:\Program Files\OpenVPN\sample-config” , copy client sample file and paste on Desktop. Open Client file , erase everything from file and paste below parameter in to file and save again . After new changes in to client file past it in to client folder “C:\Program Files\OpenVPN\config“.

client
dev tap
proto udp
remote 122.176.113.126 1194  #( Change Firewall ip address with yours)
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.cer
auth-user-pass
comp-lzo

Now click on OpenVPN GUI icon to start program then go to taskbar in left corner and hit to OpenVPN to connect with VPN server.

vpn3

Provide username & password for authentication

vpn1

 

vpn2

Your client computer has been connected with VPN server successfully . You can test local connectivity from public network.

ping

Download PDF

NO COMMENTS

Leave a Reply

Required Captcha *